linuxaudio.org

I had that problem.  First, no devices were created.  Remember to run

./snddevices from de alsa-driver??? dierctory.

Second, the driver that comes with Red Hat was installed.  I had to

remove old modules.

Third: No sound server should be running..
I found some info here> http://www.rme-audio.com/english/linux/alsa.htm
GZS
BrbrOfSvl@aol.com wrote:

quoted text
> Thanks for your suggestions...

> When I run "alsaconf" it finds the HDSP just fine, but when it tries to bring up the volume, I get this message:

>

>

> Starting sound driver snd-hdsp Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.

>       You may find more information in syslog or the output from dmesg

> /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: init_module: No such device

> /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o failed

> /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod snd-hdsp failed

>                                                            [FAILED]

> Starting sequencer                                         [  OK  ]

> Restoring sound driver settings /usr/sbin/alsactl: load_state:1121: No soundcards found...

>                                                            [FAILED]

>

>

> After that an lsmod shows no snd-hdsp.  Any idea what could cause this or how to go about solving it?

>

> Thanks,

>

> Matt Barber

>

> 

--

This Message is sent from my Red Hat 8.0 Linux server

      Machine Registration number 205692 at http://counter.li.org/
       .-.                    Gustavo Zamorano S.

     .-. |                    Registered Linux user number 320898

   .-. | |                                      at http://counter.li.org/