Could you postcat /proc/intterupts too? Perhaps your USB interface &=
; mouse are on the same IRQ.. that might upset things (though it shouldn=
9;t)Have you tried other physical USB ports for the mouse & int=
erface?
-HOn Saturday, December 17, 2011, Carlo Ascani <carlo.ratm@gmail.com> wrote:> Hi =
all,>> Jackd does not start if an USB mouse is plugged into m=
y laptop.
Ubuntu Linux 11.04>> $ uname -a> Linux jaco 2.6.38-8-=
lowlatency-pae #42+all1~lucid1-Ubuntu SMP PREEMPT
grep USB> 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Se=
ries Chipset> USB2 Enhanced Host Controller (rev 05)> 00:1d.0=
USB Controller: Intel Corporation 5 Series/3400 Series Chipset
Bus 002 Device 005: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mous=
e> Bus 002 Device 004: ID 13b2:0008> Bus 002 Device 002: ID 8=
087:0020
Bus 001 Device 004: ID 04f2:b1e4 Chicony Electronics Co., Ltd> Bus =
001 Device 002: ID 8087:0020> Bus 001 Device 001: ID 1d6b:0002 Linux=
Foundation 2.0 root hub
ight 2001-2005 Paul Davis and others.> Copyright 2004-2011 Grame.
e, and you are welcome to redistribute it> under certain conditions;=
see the file COPYING for details> no message buffer overruns
de with priority 10> control device hw:1> control device hw:1=
reating alsa driver ... hw:1|hw:1|1024|2|44100|0|0|nomon|swmeter|-|32bit
rames (23.2 ms), buffer =3D 2 periods> ALSA: final selected sample f=
ormat for capture: 24bit little-endian> ALSA: use 2 periods for capt=
ure
ack (Broken pipe)> Cannot start driver> JackServer::Start() f=
ailed with -1
dio card Audio1> audio_reservation_finish> control device hw:=
1>> The same command, without mouse, just works,>
Ascani | www.carloratm.org>=
; skype: carloratm> cell: 3202915799> _______________________=
________________________ http://li=
sts.linuxaudio.org/listinfo/linux-audio-user