linuxaudio.org

On 15 March 2012 at 18:48, Jan Depner  wrote:
> On Thu, 2012-03-15 at 16:08 -0700, Bob van der Poel wrote:

quoted text
> > On Thu, Mar 15, 2012 at 3:06 PM, Jan Depner  wrote:

> >

> > > Little known fun fact - if the on/off switch is in the on position, even

> > > though you don't have the power cable in or batteries in it, nothing

> > > will happen when you attach it to the USB port.  Brilliant design!  If

> > > it's switched off it should come up saying ">AUDIO INTERFACE".  Press

> > > the right arrow to switch it to ">CARD READER" then press ENTER followed

> > > by ENTER, and it should show up on your system.  There will be PROJnnn

> > > directories where the AUDIO data will be stored.

> >

> > Okay, tried it again. And, it works :)

> >

> > Silly me ... It didn't occur to me that the computer needed to be

> > connected at the time of selection. I just thought one set the port to

> >  and then you could plug/unplug ... like a camera :)

> >

> > Nope.

> >

> > For others as dumb as me:

> >

> > 1. Plug the square end of the USB cable into the R16

> > 2. Plug the flat end into the computer.

> > 3. If the R16 was ON then hit the USB button and select

> >     or

> >     If the R16 was OFF then the menu should come up.

> >

> > Either way, when you unplug the cable you lose the connection and need

> > to go back to <1>.

> >

> > Honestly, I think it is easier to just pull the card and use that

> > directly in the computer :)

> >

> >

>     Yeah, either way works.  For me it's just easier to make sure it's

> off and then plug it in.  I found out about the on/off switch the hard

> way.  I plugged it in one day and spent about 15 minutes trying to

> figure out why it didn't show up like normal.  It was a Homer Simpson

> moment.  DOH!  With two of these things I really have an easy time

> recording my band - 5 vocal mics, 1 harmonica mic, 3 guitars, bass,

> kick, snare, drum overhead, and I still have 3 inputs left!  There is,

> as advertised, about a 2ms delay on the second unit

> but when I insert the tracks into Ardour I can nudge the tracks

quoted text
> from the second unit.

What does that last statement mean?  Does that mean that when two

R16s are being operated that the 2nd of the two sort of, kind of,

works with Ardour?
Thanks...
--

Kevin
_______________________________________________

Linux-audio-user mailing list

Linux-audio-user@lists.linuxaudio.org

http://lists.linuxaudio.org/listinfo/linux-audio-user