linuxaudio.org

--f46d04088e3d1b3de304c04833c0

Content-Type: text/plain; charset=UTF-8
Just an update on this...
I just created a full project with a combination of 39 tracks and busses

with A3, and with Jack2 everything exported just fine.  I haven't been able

to export anything but very small projects with mixbus and Jack2.  The

issue definitely seems to be related to mixbus, Jack2 and the size of the

project.
--Jason
On Sat, May 5, 2012 at 1:34 PM, Jason Jones wrote:
> I'm cross posting, including this to the JACK mailing list.

quoted text
>

> On Sun, Feb 26, 2012 at 1:09 AM, Jason Jones wrote:

>

>> Hey guys..  I recently acquired a RME Raydat interface (works like a

>> *charm*, and I love it!), but ever since I installed it, I'm getting a

>> random error when I try to export my tracks, and it's driving me bonkers.

>>

>> Previously to installing the Raydat card, I had used ardour for

>> approximately 10 years, and have never experienced this problem.

>>

>> The problem is about 75% of the time, when exporting, the GUI will just

>> sit there and do nothing, maintaining the "export" button depressed

>> continually.   Within QJackctl's "message" window, I see the following

>> error:

>>

>> JackEngine::XRun: client = ardour was not run: state = 2

>>

>> JackFreewheelDriver::Process: Process error

>>

>> 00:31:20.920 XRUN callback (1).

>>

>>

>> The remaining 25% of the time it exports just fine, without issue.

>>

>>

>> Needless to say, this is extremely frustrating.  Googling the problem

>> returns nothing but the snippet of code which contains the error message

>> itself, which can be found at the link below:

>>

>>

>>

>> http://www.trac.jackaudio.org/browser/jack2/branches/pipelining/common/J...

>>

>>

>> Any help would be greatly appreciated.  If more info is needed, please

>> let me know what I can get you.

>>

>>

>> Also, thanks to everyone who assured me that the Raydat card works well

>> under Linux.  It really does work like a charm.

>>

>>

>> Regards,

>>

>> --Jason

>>

>> www.advancedbudgetstudios.com

>>

>

>

> I've since found that this problem only occurs in Jack2.  Jack1 exports

> 100% of the time just fine, but I've found that Jack2 (aside from the

> export problem) works much better under high stress.  Most of my projects

> contain a high number of tracks / plugins / etc... Thus, high stress.  It'd

> be very nice to go back to Jack2, but not being able to export pretty much

> kills any usefulness from it.  Any ideas at all?

>

> Thanks in advance.

>

> --Jason

>

--f46d04088e3d1b3de304c04833c0

Content-Type: text/html; charset=UTF-8

Content-Transfer-Encoding: quoted-printable
Just an update on this...I just created a full project =

with a combination of 39 tracks and busses with A3, and with Jack2 everythi=

ng exported just fine. =C2=A0I haven't been able to export anything but=

 very small projects with mixbus and Jack2. =C2=A0The issue definitely seem=

s to be related to mixbus, Jack2 and the size of the project.

--JasonOn Sat, May 5=

, 2012 at 1:34 PM, Jason Jones <poeticintensity@gmail.com><=

/span> wrote:

I'm cross pos=

ting, including this to the JACK mailing list.=
On Sun, Feb 26, 2012 at 1:09 AM, Jason=

 Jones <poeticintensity@gmail.com> wrote:
Hey guys.. =C2=A0I recently acquired a RME R=

aydat interface (works like a *charm*, and I love it!), but ever since I in=

stalled it, I'm getting a random error when I try to export my tracks, =

and it's driving me bonkers.
Previously to installing the Raydat card, I had used ardour =

for approximately 10 years, and have never experienced this problem.<=

div>The problem is about 75% of the time, when exporting, th=

e GUI will just sit there and do nothing, maintaining the "export&quot=

; button depressed continually. =C2=A0 Within QJackctl's "message&=

quot; window, I see the following error:
JackEngine::XRun: client =3D ardour was not run: state =3D 2

JackFreewheelDriver::Process: Process error

00:31:20.920 XRUN callback (1).
The remaining 25% of the t=

ime it exports just fine, without issue.
Needless to say, this is extremely frustrating. =C2=A0Googling =

the problem returns nothing but the snippet of code which contains the erro=

r message itself, which can be found at the link below:
http://www.trac.jackaudio.org/browser/jack2/branches/pipelining/common/Ja=

ckFreewheelDriver.cpp?rev=3D4306
Any help would be greatly appreciated. =C2=A0If more info i=

s needed, please let me know what I can get you.
Also, thanks to everyone who assured me that the Raydat car=

d works well under Linux. =C2=A0It really does work like a charm.
Regards,
--Jasonwww.advancedbudgetstudios.com

I've since found=

 that this problem only occurs in Jack2. =C2=A0Jack1 exports 100% of the ti=

me just fine, but I've found that Jack2 (aside from the export problem)=

 works much better under high stress. =C2=A0Most of my projects contain a h=

igh number of tracks / plugins / etc... Thus, high stress. =C2=A0It'd b=

e very nice to go back to Jack2, but not being able to export pretty much k=

ills any usefulness from it. =C2=A0Any ideas at all?
Thanks in advance.--Jason
--f46d04088e3d1b3de304c04833c0--